Tuesday 15 June 2021
  • :
  • :

Why to Switch from Conventional Roofing to Rubber Bond Roofing

Most of the house owners with a stubborn mindset still prefer conventional flat roof covering their domicile. And, they don’t mind spending bucks on repairs for leaks the roof has incurred over a period of time. The average lifespan of such kind of roofing is 10 years or less. As with any renovation venture, it’s is the time to get your roofing checked out. The professionals in this vertical will guide whether it’s worth repair or the entire covering needs to be replaced. If the latter one is the case, it may be right time to switch to rubber roofing material such as EPDM. This not the best modern-day solution to seal and cover well, but will last a long time. Plus, it requires less maintenance as compared to flat roofing.

What is rubber roofing?

Typically, it is the toughest rubber variety that can be incorporated into a membrane to any roof arrangement in order to combat the effects of extreme weather conditions. Most are affixed by a gutter or slight camber, which can remove the accumulated rainwater. The rubber roofing, as a rule of thumb, should be installed by specialists, rolled into place, and then affixed using a strong adhesive. After this, all seams are covered by a similarly watertight, resistant tape.

A brief about EPDM

Stands for Ethylene Propylene Diene Monomer, it is the most widespread synthetic rubber commonly employed in rubber membrane roofs.  Installation of EPDM is a breeze, if you professionals doing this for you. Unlike, other roofing systems, no special tools or equipment are required. EPDM typically come raw in form of sheets that can cut and shaped easily to blend with any roof design, including parapets, awkward air vents often found on flat roofing. EPDM are known to last longer than other roofing arrangements, plus a proven record of performance against leaks and tears, low maintenance, and excellent weathering attributes.

The new EPDM rubber membranes are best for all kind of house, right from apartment to villas. Since this is special kind of roofing, there is a need to shield it from natural elements such as snow and rain with a specific material. For a normal pitched roof, shingles and felt paper are perfect to keep the precipitation from accumulating. On the other side, the flat roofing doesn’t have the inclination to remove the water off itself. The standing puddles on flat roofs are the biggest reason for those nasty leaks. This is where rubber roofing application as EPDM is perfect to protect your accommodation from damages caused by water infiltration.

The rubberbond roofing Surrey has the ability to combat against the effect of rain, wind, and sun. Furthermore, EPDM rubber roofs can stand up against ozone and ultraviolet damages. This type of roofing doesn’t become brittle with time, is resistant to both fungus and moss.

To avail the benefits of rubberbond roofing Surrey, you need the right guy to do the installation job for you. This will help to keep after installation issues at bay.

Leave a Reply

Your email address will not be published. Required fields are marked *